Technicolor - Thomson CCU DT 500 The converter must be connected to the, B1707M00LD, User manual

162	Chapter 3 - Camera - DC/DC Converter
		External DC-to-DC converter

1. «13V/50W» or «24V/50W» receptacle	The voltage on output 4 of the connector is
Regulated voltage output.	13 or 24 V depending on the type of conver-
	ter. The maximum power produced is 50
24V	Watts.

43		21		13VDCOUT/50W		Receptacle	Note:
				OR		Type: XLR-4-31	The maximum power (50W) produced by
						P/N: 91538047
							the external converter connected on the
						Corresponding socket	camera "DC OUT" is ensured with a maxi-
						Type: XLR-4-12C	mum triaxial cable length	detailled in the
						P/N: 91647565	SPECIFICATION chapter.
1 : GND						3 : N.C.
2 : N. .						4 : +V OUT
2 «			» receptacle				Converter supply:
	Connection of cable connecting the						The voltage received on	this receptacle
	converter to the camera.						varies between 30 V DC and 52 V DC
14		23			Receptacle
							depending on:
	DC IN				Type: EMD04+Z-ERNC		• The length and type of the triaxial cable
					P/N: T9003619		• The power consumed by the converter.
					Corresponding socket
							The - 5 V is used to delay starting of the con-
					Type: FFA-1S-304-CLAC52
					P/N: T9003618		verter on camera power on to prevent the
1 : +48V IN						3 : GND	Channel Control Unit power supply tripping
							out.
2 : -5V IN						4 : GND
							If a DC-to-DC converter (even unloaded) is
							connected to the camera while operating, the
							safety system will cause the camera to trip
							out.
							The converter must be connected to the
							camera with camera power off.
3							Light: the DC voltage is present on the con-
							verter output.

THOMSON TTV1707 / CCU DT500	B1707M00LD
User manual	September 2000