Technicolor - Thomson CAMERA TTV 1707 Extgenlock.Ref, Camera, peak-to-peak / 75 Ohms, B1707M00LD

CAMERA	Receptacles:		175
Chapter 4 - Channel control unit
Description
8. «TRIAX» receptacle			The cable transmits the various signals
Connection of the TRIAXIAL cable			and the camera power supply.
connected to the camera control unit.			Output voltage: 52V DC
			I max: 3 A
	•	LEMO 75 Ω
	•	LEMO 50 Ω
	•	FISCHER
	•	KINGS
	•	DAMAR HAGEN

9. «GEN LOCK EXT. REF» receptacles				The «loopedthrough» reference signal
				input. The signal is not loaded in the
				Channel Control Unit. Input level: 1 V
				peak-to-peak / 75 Ohms.
				• As a general rule, the signal must be of
				"composite video" type to control the
				composite and digital signals at the
	EXTGENLOCK.REF.	Receptacles		output from the	channel	control unit
				(link J92 set to	ON on	the GEN-
		Type: P2189-A
				LOCK/VIDEO board.
		P/N: T9003306
				• If the reference signal does not a
				"Burst", place link J92 on the GEN-
				LOCK/VIDEO board to OFF position.
				The composite signal subcarrier is then
				slaved with respect to the composite
				sync signal.
				Refer to the INSTALLATION chapter for
				equipement phase alignment.
10.«COMPOSITE V.B. .» receptacles.				Encoded PAL or NTSC signal outputs.
				Levels: 1 V peak-to-peak/75 Ohms.
1	2COMPOSITE.VB..		Receptacles
			Type: P2189-A
SERIAL1	DIGITAL2OUTPUT	3	P/N: T9003306
11.«SERIAL DIGITAL OUTPUT» receptacles				Serial digital signal outputs:
			Receptacles+câbles	4:2:2, 270 Mbits.
			Type:
			98230x-021-009.0
			P/N: T6000091

B1707M00LD	THOMSON TTV1707 / CCU DT500
September 2000	User manual