Chapter 2 - Installation

137

Equipment phase alignment with a digital installation

 

«ΦH FINE»: Digital signal phase adjustment in steps of 37 ns.

«SC phase» and «Front porch» alignment of the composite output signal

If the composite video output is used as a monitoring output, it is recommended to set the link J92 on the «GENLOCK/VIDEO» board to «OFF». In this case, the output composite signal carrier is internally slaved with respect to the sync signals.

If necessary, the «SC phase« and «Front porch» alignment can be adjusted using the «SC/H» and «FRONT PORCH» thumbwheels.

2.5.2 - Equipment without external reference (free mode)

Set the link J92 on the «GENLOCK/VIDEO» board to «OFF»

Horizontal phase alignment of the digital output signal

The «ΦH COARSE» and «ΦH FINE» thumbwheels are inactive.

«SC phase» and «Front porch» alignment of the composite output signal

If the composite video output is used as a monitoring output, and if necessary, the «SC phase« and «Front porch» alignment can be adjusted using the «SC/H» and «FRONT PORCH» thumbwheels. The output composite signal carrier is internally slaved with respect to the sync signals.

B1707M00LD

THOMSON TTV1707 / CCU DT500

September 2000

User manual

Page 137
Image 137
Technicolor - Thomson CAMERA TTV 1707, CCU DT 500 manuel dutilisation Equipment without external reference free mode