Chapter 5 - 4 cm/14 cm Viewfinders | 185 |
4 cm Viewfinder |
|
5.1.6 - Mechanical adjustments
2
1
To adapt the viewfinder to the operator’s vision, make the following adjustments:
• Longitudinal position adjustment
Loosen knurled locking ring (1) on the viewfinder and move the viewfinder assembly. Tighten the ring.
• Transverse position adjustment
Loosen knurled ring (2) on the viewfinder and move the viewfinder assembly to the left or right. Tighten the knurled ring.
•Up-down position adjustment Raise or lower the eyepiece.
•Focusing adjustment
Rotate the focusing ring to move the eyepiece internal lens.
Procedure:
•With the camera, aim at a distant object. Focus on this object.
•While observing this object with the left eye which is disengaged, rotate the focusing ring so that the viewfinder image is clear.
B1707M00LD | THOMSON TTV1707 / CCU DT500 |
September 2000 | User manual |
