Chapter 3 - Camera - DC/DC Converter | 165 |
Camera Operation |
|
•MEM: Initial operation of the «RET» button displays the «RET1» or «RET2» video and further operation of the button is required to return to the camera video display.
MON SELECT: Selection of video signal available on the «MONITOR» socket.
•ENC: Encoded video
•VF: viewfinder video (with character inlay).
NEUTRAL FILTER: Density wheel electrical control
•Position 1: Clear
•Position 2: T=25%
•Position 3: T=6,3%
•Position 4: T=1,6%.
PRGM MARKER 1: Programming of marker selected by «SELECT MARKER: 1» (Refer to paragraph 2.2.3 - Marker functions).
PRGM MARKER 2: Programming of marker selected by «SELECT MARKER: 2» (Refer to paragraph 2.2.3 - Marker functions).
SELECT MARKER: Marker selection.
•0: No marker.
•1: Displays markers programmed in «PRGM MARKER 1» (Refer to paragraph 2.2.3 - Marker functions).
•2: Display of markers programmed in «PRGM MARKER 2» (Refer to paragraph 2.2.3 Marker functions).
•VF SELECT: Viewfinder video signal selection:
•Y: Luminance signal
•ENC: Encoded video
•COL: Y, CR, CB (used with colour viewfinder)
B1707M00LD | THOMSON TTV1707 / CCU DT500 |
September 2000 | User manual |
