5085657 Oleoclean.qxp 14/01/09 16:04 Page 24

Eng

-Outside the appliance: Leave the oil to cool for approximately 3 hours, then turn the Oil Box control switch to Oil box position and take out the container. (fig.29-30)

!When the oil container is full of oil do not submerge it under water. To clean it, wipe it with a kitchen paper towel or damp cloth.

!Carry the container with both hands. Store it in a cool dry place away from the light.

•Wait at least 3 hours before taking the full container out of the appliance. Transport it with care.

•To re-use the oil, take out the container with care.

Unscrew the oil box cap and empty the oil in the fryer bowl. (fig.31-32)

•For solid fat, remove the lid from the container. Turn the container over and press it to loosen the fat. Cut it into pieces and melt it in a separate pan. Then, pour it into the bowl. (fig.33-34)

!Never put the OIL BOX in a microwave oven.

•Insert the empty container in the fryer, with its lid and cap in position. Place the Oil Box control switch on the Fry position. (fig.17)

!Do not pour used oil down the sink. Drain it into a suitable container.

Changing oil:

•Do not pour used oil/fat into the sink. Leave it to cool, and throw it away with household waste-according to the local community regulations.

CAUTION

•We recommend changing the oil/fat after a maximum of 10 to 12 uses. If using sunflower oil, ensure the oil is changed after every 5 uses.

Magiclean: very easy to clean.

•The lid, the bowl, the housing, the frying basket and the Oil Box are dishwasher safe. (fig.36)

•The oil filter grid located in the removable bowl is fixed. Do not try to dismantle it. (fig.37)

•After cleaning, press on the red button under the fryer to release any water in the bowl. (fig.8)

!Before filling the fryer bowl, always check to ensure the red button under the fryer is in the correct position.

22