Texas Instruments MSP430x11x1 warranty Description, Tssop

										MSP430x11x1
						MIXED SIGNAL MICROCONTROLLER
								SLAS241C ± SEPTEMBER 1999 ± REVISED JUNE 2000
D Low Supply Voltage Range 1.8 V ± 3.6 V			D		Serial Onboard Programming
D Ultralow-Power Consumption			D Programmable Code Protection by Security
Low Operation Current,					Fuse (C11x1 Only)
1.3 ∝A at 4 kHz, 2.2 V			D		Family Members Include:
160 ∝A at 1 MHz, 2.2 V
					MSP430C1111: 2KB ROM,128B RAM
D Five Power Saving Modes:					MSP430C1121: 4KB ROM, 256B RAM
(Standby Mode: 0.8 ∝A,					MSP430F1101: 1KB + 128B Flash Memory
RAM Retention Off Mode: 0.1 ∝A)									(MTP{), 128B RAM
D Wake-Up From Standby Mode in 6 ∝s					MSP430F1121: 4KB + 256B Flash Memory
D 16-Bit RISC Architecture, 125 ns									(MTP{), 256B RAM
			D Available in a 20-Pin Plastic Small-Outline
Instruction Cycle Time
					Wide Body (SOWB) Package and 20-Pin
D Basic Clock Module Configurations:
					Plastic Thin Shrink Small-Outline Package
± Various Internal Resistors
					(TSSOP)
± Single External Resistor
± 32 kHz Crystal							DW OR PW PACKAGE
± High Frequency Crystal
								(TOP VIEW)
± Resonator
± External Clock Source				TEST				1	20	P1.7/TA2/TDO/TDI
D 16-Bit Timer With Three Capture/Compare				VCC				2	19	P1.6/TA1/TDI
		P2.5/Rosc						3	18	P1.5/TA0/TMS
Registers					VSS			4	17	P1.4/SMCLK/TCK
D Slope A/D Converter With External			XOUT					5	16	P1.3/TA2
					XIN			6	15	P1.2/TA1
Components
			RST/NMI					7	14	P1.1/TA0
D On-Chip Comparator for Analog Signal		P2.0/ACLK						8	13	P1.0/TACLK
Compare Function or Slope A/D		P2.1/INCLK						9	12	P2.4/CA1/TA2
Conversion	P2.2/CAOUT/TA0							10	11	P2.3/CA0/TA1

description

The Texas Instruments MSP430 series is an ultralow-power microcontroller family consisting of several devices featuring different sets of modules targeted to various applications. The microcontroller is designed to be battery operated for an extended-application lifetime. With 16-bit RISC architecture, 16 bit integrated registers on the CPU, and a constant generator, the MSP430 achieves maximum code efficiency. The digitally-controlled oscillator provides fast wake-up from all low-power modes to active mode in less than 6 ms.

Typical applications include sensor systems that capture analog signals, convert them to digital values, and then process the data and display them or transmit them to a host system. Stand alone RF sensor front end is another area of application. The I/O port inputs provide single slope A/D conversion capability on resistive sensors. The MSP430x11x series is an ultralow-power mixed signal microcontroller with a built in 16-bit timer and fourteen I/O pins. The MSP430x11x1 family adds a versatile analog comparator.

The flash memory provides added flexibility of in-system programming and data storage without significantly increasing the current consumption of the device. The programming voltage is generated on-chip, thereby alleviating the need for an additional supply, and even allowing for reprogramming of battery-operated systems.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

{MTP = Multiple Time Programmable

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Copyright  2000, Texas Instruments Incorporated

POST OFFICE BOX 655303 •DALLAS, TEXAS 75265 1