Thermador DM302 the Timer, the Clock, Setting the, To Cancel an Active Timer, To Change a Timer

OvenOperations Built-inDMOvenCareandUseManual

the Timer

(Continued from previous page)

To Cancel an Active Timer:

Select TIMER 1 OFF or TIMER 2 OFF.

To Set Both TIMER 1 and TIMER 2:

,Follow the steps above to set each Timer. The Timerwith the leastamount of countdown time has display priority. The countdown display for the second timer is shown automatically when the first timer has ended.

.	The words "TIMER 1" and "TIMER 2" are both displayed along with the number countdown,
.	The designation, "TIMER 1" or 'TIMER 2" with the least remaining countdown time is more brightly lit than the other word.
.	During the countdown, touch CLOCK orTTMER. Depending on the pad touched, either the time of day or the remaining time is
	briefly displayed,

To Change a Timer:

i.Touch T%MER i or T[MER 2.

2.Enter the new desired time,

3.Touchthe START pad.

the Clock

.	Always set the clock after installation or after a power failure.
	Once power returns to the oven, the clock displays the time of
	day when power was turned off or lost.
.	The Time of Day clock can be set while an automatic timed
	cooking mode is in operation.
.	If 10seconds elapse betweentouchingthe clock pador number
	pads, the oven will beep two times as a reminder,
.	After 5 more seconds, the clock pad will stop flashing and the
	original time will be displayed.

To Set the Clock:

1.Touch the CLOCK pad. Message scrolls in display:

ENTER TIiTEOF OR_'THEIX_gL/EH5TRRT

2.Set the current time of day.

Message scrolls in display:

ENTER TIiTEOF ORffTHEIX_gL/EH5TRRT

3.Touch START or CLOCK.

Setting the

TouchOVEN LIGHT pad once to turn light on or off, The lights do not operate inthe Self Clean mode,

10