OPERATION
OPERATION
Flail Mower PRE-OPERATION Inspection
Mower ID#________________ | Make | ____________________ | |
Date: | ________________ | Shift | ____________________ |
Before conducting the inspection, make sure the tractor engine is off, all rotation has stopped and the tractor is in park with the parking brake engaged. Make sure the mower is resting on the ground or securely blocked up and all hydraulic pressure has been relieved.
Table 1:
| Item | Condition at | Specific Comments if |
| Start of Shift | not O.K. | |
|
| ||
|
|
|
|
The Operator’s Manual is in the canister |
|
| |
All safety decals are in place and legible |
|
| |
The Mounting frame bolts are in place and tight |
|
| |
The connection bolts & pins are tight |
|
| |
There are no cracks in mower |
|
| |
The Hydraulic Cylinders pins are tight |
|
| |
The Hydraulic Pump hose connections are tight |
|
| |
The Hydraulic Valve hose connections are tight |
|
| |
The Hydraulic Valve controls function properly |
|
| |
There are no leaking or damaged hoses |
|
| |
The Hydraulic Oil level is full |
|
| |
There is no evidence of Hydraulic leaks |
|
| |
The Blades are not chipped, cracked or bent |
|
| |
The Blade bolts are tight |
|
| |
The Deflectors are in place and in good condition |
|
| |
The shields are in place and in good condition |
|
| |
The Skid shoes are in good condition & tight |
|
| |
The Hyd. motor mounting bolts are tight |
|
| |
Operator’s Signature: |
|
| |
|
|
|
|
DO NOT OPERATE an UNSAFE TRACTOR or BOOM
Side and Rear Flail | Operation Section |
© 2011 Alamo Group Inc.
