OPERATION
9.4 Crossing Ditches and Steep Inclines
When crossing ditches with steep banks or going up sharp inclines, it is possible that the main driveline inner profile will penetrate into the outer housing to its maximum depth until the assembly becomes solid (driveline is at its extreme shortest length). This type of abusive operation can cause serious damage to the tractor and mower drive by pushing the PTO into the tractor and through the support bearings or downward onto the PTO shaft, breaking it off.
Damage resulting from
When confronted with an incline or ditch, do not approach from an angle which is perpendicular or straight on as damaged to over collapse of the driveline may occur.
When crossing such terrain, the implement should be fully lowered for a lower center of gravity and added stability.
Side and Rear Flail | Operation Section |
© 2011 Alamo Group Inc.