4.1Searching broadcasting services 31
Touse the USALS protocol, se-
lect the Installation
>
USALS
Setting menu. You should see
ascreen like the left figure.
At first you have to set the Mo-
torized DiSEqC 1.3 option to En-
able.
Toget every satellite position calculated, perform the following
steps:
1.
Choose your desiredsatellite at the Satellite Nameop-
tion.
2.
Select the tuner that is connected to the motorized an-
tennaat the Tuner Select option.
3.
Enteryour location to the My Longitude option and the
My Latitude option with the
V−
,
V+
and numeric but-
tons.
4.
Enterthe position of your selected satellite to the Satellite
Angleoption if it is not correct.
5.
Select the Goto the position option; then the antenna
willturn toward your selected satellite as calculating its
position.
6.
Ifthe receiving quality, which is displayed at the bottom
right of the screen, is not good, then tune the antenna
finely with the Move option. The changed position is
automaticallysaved. Atthis time you had better check
the receiving quality of everytransponder and choose
thebest one at the Transponder (or Frequency) option. It
willbe helpful to your fine tuning.