4.1Searching broadcasting services 33
1.
Choose your desiredsatellite at the Satellite Name op-
tion.
2. Set the Search Modeoption to Manual.
3.
Chooseyour desired transponder at the Frequency op-
tionor enter it with the numeric buttons.
4.
Enterthe symbol rate of your desired transponder to the
SymbolRate option with the numeric buttons.
5.
Set the Polarization option to the polarization of your
desiredtransponder.
6.
Ifyou set the Network Searchoption to On, the digital
receiverwill check up the up-to-date channel information
assearching services, but it takes rather longer time.
NOTE
Youmay get transponder information from a satellite magazine
or website such as
http://www.satcodx.com
or
http://www.
lyngsat.com.
Searchingone service of a transponder
Tosearch one service of a transponder, perform the following
steps:
1.
Choose your desiredsatellite at the Satellite Name op-
tion.
2. Set the Search Modeoption to Advanced.
3.
Chooseyour desired transponder at the Frequency op-
tionor enter it with the numeric buttons.
4.
Enterthe symbol rate of your desired transponder to the
SymbolRate option with the numeric buttons.
5.
Set the Polarization option to the polarization of your
desiredtransponder.