Using Bypass Tray

Place paper on the bypass tray when you use the following media types as copy paper:

yThick paper (81 to 163 g/m2)

ySpecial media types such as tracing paper, sticker labels or overhead transparencies

yStandard size paper which cannot be placed in the drawers of the equipment and Paper Feed Unit (optional) (e.g. A5-R)

Using the bypass tray is recommended also for copying on standard-size paper other than those placed in the drawers. The following sizes are available for bypass copying:

Media type

Paper size

Maximum sheet

capacity *1

 

 

Plain paper

A/B format:

100 sheets (64 g/m2)

(64 - 80 g/m2)*2

A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO

100 sheets (80 g/m2)

 

LT format:

 

THICK PAPER 1

1 sheet

LD, LG, LT, LT-R, ST-R, COMP, 13"LG

(81 - 105 g/m2)*3

(81 - 105 g/m2)

 

THICK PAPER 2

 

1 sheet

(106 - 163 g/m2)*3

 

(106 - 163 g/m2)

Tracing paper

 

1 sheet

(75 g/m2)*3

 

 

Sticker labels*3

 

1 sheet

Transparencies*3, *4

A4 only

1 sheet

*1 “Maximum sheet capacity” refers to the maximum number of sheets when TOSHIBA-recommended paper is used. See the following page for the TOSHIBA-recommended paper:

P.36 “Recommended paper”

*2 The paper of 50 to 63 g/m2 can be used if it is set on the bypass tray one by one.

*3 Automatic duplex copying is not available.

*4 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.

Using Bypass Tray 59

Page 61
Image 61
Toshiba 205, 165 manual Using Bypass Tray, Media type Paper size Maximum sheet Capacity *1