Toshiba 205, 165 manual Paper Type, Thick PAPER2 Transparency

2 Check if the lamp of the paper size placed on bypass tray is lit. If not, press the [COPY] button several times until the lamp of the desired paper size is lit.

The LCD screen shows as follows:

Ready for bypass		1
100%	SORT
ZOOM	FINISHING	EDIT

3	Select the media type most suited to the paper placed in the drawer.
	(1) Press the selecting button C once.

(2) Press the selecting button A three times to select “PAPER TYPE”, and then press the [ENTER] button.

Paper type setting menu appears.

PAPER TYPE

THICK PAPER1

THICK PAPER2

TRANSPARENCY

(3)Press the selecting button C for several times until you select the desired media type, and then press the [ENTER] button.

You can select the media type from the following three:

THICK PAPER 1: Thick paper (81 to 105 g/m2)

THICK PAPER 2: Thick paper (106 to 163 g/m2), sticker labels

TRANSPARENCY: Overhead transparencies

yYou do not need to select the media type when you use plain paper (64 to 80 g/m2) or tracing paper. When the media type is already set at either of them, select “OFF”.

yIf you select a different media type from the one you placed on the bypass tray, this could cause a paper jam or the quality of the copied image could be lowered.

4 Place the original.

Using Bypass Tray 65