2 HOW TO MAKE COPIES

5 Press the [START] button.

Copying starts. The paper will exit with its copied side down.

The paper exit area and exiting paper are hot immediately after the exit. Handle them with care.

When “Next original?” appears

Next original?

YES

NO

This message appears when “SORT” is selected for the exiting method while an original is being placed on the original glass, or when 2-sided copying is being performed.

Place the next original on the original glass, and then press the [START] button. The data of the next original will be scanned. When all the originals have been scanned, select “NO”, and then press the [START] or [ENTER] button. Copying starts.

When the number of sheets exiting has exceeded 250

To prevent exiting paper from falling off the receiving tray, the equipment causes copying to pause when approx. 250 sheets of paper have been continuously exited. The LCD screen shows as follows:

Clear paper output tray:

PRESS START KEY.

Remove the paper from the receiving tray, and then press the [START] button. Copying resumes.

Press the [CLEAR/STOP] button to end the copy job. “Memory clear?” appears on the LCD screen. Select “YES”, and then press the [START] or [ENTER] button.

When the paper has run out

When the paper in the drawer has run out during copying, the copying stops and the LCD screen shows as follows:

e.g.) Paper in the drawer of the equipment has run out

DRAWER1 empty

Open DRAWER1

Load paper

Close DRAWER1

The [DRAWER] lamp corresponding to the one whose paper has run out blinks. Add paper to the drawer and press the [START] button. Copying then resumes.

56 Making Copies

Page 58
Image 58
Toshiba 165, 205 manual Press the Start button, Press Start KEY, When Next original? appears, When the paper has run out