Toshiba 165, 205 manual Bypass copying on standard size paper

2 HOW TO MAKE COPIES

Bypass copying on standard size paper

Standard size paper can be used for bypass copying. In this section, the procedure is described with A4 size thick paper (90 g/m2) placed on the bypass tray as an example.

Register the size of the paper into the equipment in advance.

P.60 “Preparation - Registering paper size placed on bypass tray”

1 Place paper straight on the bypass tray face down. Then align the side guides to the paper length while holding (A).

A

yBe sure that the stack height of paper does not exceed the indicators of the side guides.

yFan the stack of paper well before placing it on the bypass tray.

yDo not push the paper forcibly into the entrance of the bypass feeder. This could cause a paper misfeed.

When you place paper of a larger size, pull out the paper holder before you start bypass copying.

64 Using Bypass Tray