Toshiba 255, 355, 455, 305, 205L manual ‰ Page Layout, ‰ Center Margin, ‰ Outer Margin

4 PRINTING FROM UNIX/Linux

‰Page Layout

The booklet mode page layout can be selected using the following options.

Option Value	Alternate Value	Description
left2right=off	OFF	Select right to left page layout for the booklet printing
		mode.
		This value decides the layout of the pages in the
		booklet.
		If this value is OFF then the layout of pages is Right to
		Left as shown in the figure below.

left2right=on	ON	Select left to right page layout for the booklet printing
		mode.
		This is the default setting.
		If the value is ON then the layout of the pages is from
		Left to Right as shown in the figure below.

Example: The command to select left to right page layout for booklet printing mode is “lp -d <queuename> -o left2right=on <filename>”.

‰Center Margin

The center margin applied for the booklet mode can be selected using the following options.

Option Value	Alternate Value	Description
centermargin		Select the center margin value for the booklet printing
=value		mode.
		This value specifies the Center Margin or the “Gutter” in
		pixels. This is in addition to the center margin already
		specified by the application. The valid range for value is
		0 to 300. Default is 0.

Example: The command to select the center margin value for booklet printing mode is “lp -d <queuename> -o centermargin=value <filename>”.

‰Outer Margin

The outer margin applied for the booklet mode can be selected using the following options.

Option Value	Alternate Value	Description
outermargin		Select the outer margin value for the booklet printing
=value		mode.
		This value specifies the Outer Margin or the “Creep” in
		pixels per page, which should take place while printing
		a booklet. The valid range for value is 0 to 600. Default
		is 0.

Example: The command to select the outer margin value for booklet printing mode is “lp -d <queuename> -o outermargin=value <filename>”.

Printing from an Application 121