2 PRINTING FROM WINDOWS
[Paper Handling] tab
The [Paper Handling] tab allows you to enable Front Cover printing, Back Cover printing, Inserting Pages, and Interleaving Pages.
y“Use Front Cover”, “Use Back Cover”, “Insert Pages” and “Interleave Pages” are not available when the Tab printing function is set.
yWhen the size of covers or sheets to be inserted is the same as that of the copy paper, change the media type or specify “Paper Source” on the [Basic] tab menu; otherwise all data will be printed from the insertion drawer.
yIf you select [Store to
1
2
3
4
5
1)Destination
This option selects the destination tray to which jobs will be output.
-Exit Tray — Select this option to route the output to the exit tray.
-Tray 1 — Select this option to route the output to the upper tray of the Finisher (optional).
-Tray 2 — Select this option to route the output to the lower tray of the Finisher (optional).
-Job Separator Upper — Select this option to route the output to the upper tray of the Job Separator (optional).
-Job Separator Lower — Select this option to route the output to the lower tray of the Job Separator (optional).
yFor
yFor
yWhen the Job Separator (optional) is installed and configured in the [Configuration] tab, you can select [Job Separator Upper] and [Job Separator Lower] instead of [Exit Tray].
When [A6] is selected in the [Print Paper Size] box, the printed paper will be always output to [Job Separator Lower].
2)Use Front Cover
This option sets front cover printing which allows you to insert or print a cover on a sheet fed from a different Drawer or Bypass tray than the Paper Source option selected in the [Basic] tab.
To enable cover printing, select the check box and select the location from where a cover sheet is to be fed and the print style to be used.
For the detailed instructions on how to print with the [Use Front Cover] setting, see the following page: P.70 “Inserting different types of paper”
Source
Select the location from where a front cover sheet is to be fed. When [Auto] is selected, the paper is automatically selected according to the printed document size.
