Configuring Discovery Settings
You can configure the discovery settings.
1)Devices
Click the arrow button to display the pull down list and check the model name that you want to search.
2)Network - Enable IPX/SPX Search
Check on this to search printers which connect to the IPX/SPX network. This is available only when the IPX/SPX protocol and Novell Client are installed in your computer, and the computer is connected to the NetWare server.
3)Network - Enable TCP/IP Search
Check on this to search devices that connect to the TCP/IP network. This is available only when the TCP/IP protocol is installed in your computer.
When this is enabled, select how it searches printers in the TCP/IP network.
•Search local subnet — Select this to search devices in local subnet.
•Specify a range — Select this to search devices in specific range of IP addresses. When this is selected, enter the IP addresses in “From” field and “To” field to specify the range.
—Configuring the Connection by Manual Selection
You can configure the connection by entering the IP or IPX address of the device manually.
Network Fax Guide — Managing Address Book | 63 |
