
New Check Prompts | Chapter 3 - Guest Check Functions |
3.2.5Override Meal Period
Meal Periods are set up by time for each day of the week in the Meal Period Setup table. The current setting can be overridden for the current check only or for all checks until the System Z report is done. The change can affect one terminal or all terminals.
For One Check Only
1.Press a {MEAL~PERIOD} key which has been set for the Meal Period wanted for this check.
•The override setting reverts back to the preset Meal Period after the check is sent.
For All Checks Today
1.Press {STAY~DOWN}.
2.Press the {MEAL~PERIOD~#} key wanted.
3.Screen prompts:
Broadcast changes? 1 – Yes, 0 - No
4.Press {YES} for the change to be effective at all stations in the system.
Press {NO} for the change to affect this station only.
•The override setting will be effective until the Meal Period is changed again, or until the next System Z report is done.