Chapter 3 - Guest Check Functions

Combine Checks

3.10.5 Combine Stored Checks to One Table

This procedure is identical to using {ADD~TO~TABLE} except it

depends on ONE CHK/TBL in the System Setup/System Config. Table (page 4 #2).

YES will add items from both checks to the resulting check.

NO will add a separate check to the table number.

ONE CHK/TBL set to NO

1.Enter items for a new check, or recall a stored check.

2.Index the table number of the check to which the current check will be combined.

3.Press {TABLE~#}.

The current check becomes a separate check for that table.

ONE CHK/TBL set to YES

1.Recall a stored check.

2.Index the table number of the check to which the current check will be combined.

3.Prompt line displays message:

Change table?

4.Press YES.

5.Screen displays a message “Check still opened” then prompts:

Add Check?

6.Press YES.

Items from the current check are added to the check number entered. That check now displays on the screen.

7.End the service round by pressing {TOTAL}, {MEDIA} or

{PRINT~CHECK}.

FS-3700 Owner’s Manual

3-39

Page 83
Image 83
Toshiba FS-3700 Series Combine Stored Checks to One Table, ONE CHK/TBL set to no, ONE CHK/TBL set to YES, Change table?