Toshiba Item, SLEEP, market, Comfort, Description, 16. COMFORT, . QUIET mode, Cooling mode, Heating mode, 17. One-Touch, Operation flow and applicable data, etc

Quiet mode is the system which, control the

revolving speed of indoor fan to work constantly at lower than speed L. In addition, noise level of indoor unit is less than usual.

Remarks :

1. Quiet mode is unable to work in dry mode.

2. Quiet mode is appropriate to work with less.

cooling load and less heating load condition. Because of the fan speed L- may cause not

enough the cooling capacity or heating capacity.

FILE NO. SVM-10020

Item Operation flow and applicable data, etc. Description

15. QUIET mode When the [QUIET] button is pressed, the fan of the

indoor unit will be restricted the revolving speed at speed L − until the [QUIET] button is pressed once

again (cancel Quiet mode).

16. COMFORT	Cooling mode									The principles of comfort sleep mode are:
SLEEP	• The preset temperature will increase as									•	Quietness for more comfortable. When
											room temperature reach setting temperature
		show on ECO operation (Item No. 9)
										• Save energy by changing room temperature
	• Press the [COMFORT SLEEP] button to
											automatically.
		choose the operating hours. Repeat
										• The air condition can shut down by itself
		pressing to select the hours.
											automatically.
		(1hr, 3hr, 5hr or 9hr)
										Remarks:
	• If the [COMFORT SLEEP] button is pressed
											Comfort sleep mode will not operate in dry
		again means cancel comfort sleep mode.
											mode and fan only mode.
	Heating mode
											.
	• The preset temperature will drop down as
		show on ECO operation (Item No. 9)
	• Press the [COMFORT SLEEP] button to
		choose the operating hours. Repeat
		pressing to setect thehours.
		(1hr, 3hr, 5hr or 9 hr)
	• If the [COMFORT SLEEP] button is pressed
		again means cancel comfort sleep mode.
17. One-Touch	One touch comfort is the fully automated operation									Operation condition for model to Europe
Comfort	that is set according to the preferable condition in									market
	a region.									When an indoor unit receives "One Touch
										Comfort Signal" from the remote controller,
										the indoor unit operates as following.
										1)	Air conditioner starts to operation when
		Fan
		Operation									the signal is received, even if the air
				AUTO		*AUTO/L		L
											conditioner was OFF.
										2)	Operation mode is set according to room
											temperature, the same as AUTO mode.
										3)	Target temperature is 75°F (24ºC).
									Time after operation
			0		12		25			4)	Louver position is set as stored position
									starts (min)
											of the operating mode.
	*AUTO/L: Fan operates depends on the setting
										5)	Fan is controlled as followings.
	temperature and room temperature.

During the One Touch Comfort mode if the indoor unit receives any signal with other operation mode,

the unit will cancel the comfort mode and operates according to the signal received.

− 43 −