FILE NO.
No. | Part name | Procedures |
|
|
|
|
|
|
|
n | Evaporator | 4) Remove three fixing screw at the right |
|
|
| (Heat exchanger) | side of the heat exchanger, and separate |
|
|
|
| the heat exchanger from the back body. |
|
|
|
| (Figure 4, 5) |
|
|
|
| <How to assemble the heat exchanger> |
|
|
|
| Heat exchanger assembly on the back body, | One screw |
|
|
| and secure it using the fixing screw without |
|
|
|
| exchanger lock due to exchanger lock assemble |
|
|
|
| for protection affect when transpotation. |
| (Figure 4) |
|
|
|
|
Exchanger lock
Two screws
(Figure 5)
o Bearing | 1) | Follow to the procedure in the item . |
| 2) | Remove the two screws used to secure the |
|
| bearing base. |
| Two | |
|
| |
|
| screws |
3) Remove the bearing base.
<Caution at assembling> | Bearing base |
•If the bearing is out from the housing, push it into the specified position and then incorporate it in the main body.
Bearing
– 94 –