Check Power Supply
(Voltage Rate ±10%)
YES
Turn OFF power supply.
Remove connector of compressor.
Check 25A | NO |
fuse (F01) |
|
| |
failure? |
|
YES |
|
|
|
Check component NO parts of control board
assembly by visual. (damage, burn,.. Etc.)
YES
Replace
control board. Replace fuse.
Turn ON power
Supply.
Check terminal |
| |
Voltage of electrolytic | NO | |
capacitor are in | ||
| ||
(Voltage Rate |
| |
±10%) x 1.414? |
| |
YES | Replace | |
| control board. |
Turn ON the unit by remote controller and wait for 3 min. (Cooling : 17°C)
A
FILE NO.
∙Connect discharge resistance (approx. 100Ω, 40W) or soldering iron (plug) between +, – terminals of the electro- lytic capacitor (500μF ) of C14 (with printed
CAUTION HIGH VOLTAGE) on P.C. board.
Discharging position (Discharging period
10 seconds or more) Plug of soldering
iron
– 83 –