Toshiba Item, Mode, NOTE :, operation, Indicator, 19. FILTER, Description, is pressed), 18. Hi-POWER, 2. Cooling operation, 3. Heating operation

		FILE NO. SVM-10020
Item	Operation flow and applicable data, etc.	Description
18. Hi-POWER	([Hi-POWER] button on the remote controller
Mode	is pressed)
	When [Hi-POWER] button is pressed while the indoor	∗ The Hi-POWER operation will be cancelled
	unit is in Auto, Cooling or Heating operation, Hi-	when press [Hi-POWER] button again.
	POWER mark is indicated on the display of the remote
	controller and the unit operates as follows.	.
	1. Automatic operation
	∙ The indoor unit operates in according to the
	current operation.
	2. Cooling operation
	∙ The preset temperature drops 2.0°F (1ºC)
	(The value of the preset temperature on the
	remote controller does not change.)
	The indoor unit's fan speed level increase 1 tap
	3. Heating operation
	∙ The preset temperature increases 3.5°F (2ºC)
	(The value of the preset temperature on the
	remote controller does not change.)
	The indoor unit's fan speed level increase 1 tap
	4. The Hi-POWER mode can not be set in Dry
	operation
19. FILTER	When the elapsed time reaches 1000 hours after
Indicator	conditioner operation, the FILTER indicator lights.
	After cleaning the filters, turn off the FILTER indicator.
	How to Turn Off FILTER Indicator
	Press [RESET] button on the indoor unit.
	NOTE :
	If [RESET] button is pushed while the FILTER indicator
	is not lit, the indoor unit will start the automatic
	operation.

.

− 44 −