User Programming
One Touch Buttons
Table 13 Special Characters
Entry Meaning
Indicates “stop.” The One Touch button blinks rapidly and stops the delivery of
*+ Hold the remaining digits in the string until it is pressed again. Multiple “stops” can be programmed into one string.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter
*additional pause escape sequences. For example, to insert a
(1~9) enter *9*8. The display of a pause in the Speed Dial Number shows a “P”
without specifying the duration. In this example, you would see “PP.”
***
*# #
Example of Special Character Usage
To create a One Touch for Park and Page under one button, program the following sequence under the One Touch button.
CNF #33***HOLD FB1 #30
CNF – puts the caller on hold and gets new dial tone. #33 – code to park call
**– this special character outputs a single * which will select an available orbit and display the selected orbit on the phone.
*HOLD – This special character is a Stop. The dial string pauses and enables the user to view the selected orbit on the display. The dial string will restart from this point when the One Touch button is pressed again.
FB1 – gets new dial tone on the PDN
#30 – code for All Call Page which allows the user to page the location of the orbited call.
To Use a One Touch Button
Press the One Touch button.
Setting/Changing a Personal Speed Dial Code
See “Storing a System/Station Speed Dial Number” on page 69.
Strata CIX and CTX IPT/DKT Telephone 11/05 | 115 |
