Advanced Operation
Speed Dial
Speed Dial
Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code. Dial sequences can include telephone numbers, authorization codes, passwords feature activation codes and pauses. Speed Dial may be used to originate a call or invoked after a call is established. There are two types of Speed Dial:
•Station SD – Your System Administrator allocates a block of up to 100 personal SD numbers (10 per telephone). You have exclusive use of them and you can create and change them from your own telephone.If you have a IPT3014 telephone, you can assign names to your station SD numbers to appear on the Personal SD Directory display (see your System Administrator or use the procedure for “Storing Personal Speed Dial Names” on page 108.)
•System SD – All telephones in your system can share a list of up to 800 System Speed Dial numbers under the exclusive control of the System Administrator. In some cases, System Speed Dial enables you to reach numbers that you would not be allowed to dial directly from your telephone.
Making a Call Using Speed Dial
There are two ways to begin a Speed Dial Call.
1.Press Spdial on a
...or press the * button on any telephone.
2.Dial the Station or System Speed Dial Number. Station Speed Dial numbers occupy numbers 100~199. System Speed Dial numbers occupy numbers 200~999.
Table 5 | Speed Dial Access Codes |
| |||
|
|
|
|
| |
| Feature |
|
| Feature Access Code Sequences | |
| Speed Dial (Dialing an SD number) |
| |||
|
|
|
|
| |
|
| Station | 1 | Spdial2 + nnn | |
|
|
|
| nnn = 100~199 Station SD bin numbers | |
|
|
|
|
| |
|
|
|
|
|
|
|
| System | 1 | Spdial2 + nnn | |
|
|
| nnn = 200~999 System SD bin numbers | ||
|
|
|
|
| |
|
|
|
|
|
|
1.Stations must be assigned/enabled Speed Dial capabilities in system programming by an Administrator in Program
2.If your telephone does not have a Spdial button, press the * button, then dial the three digit Speed Dial bin number (nnn).
68 | Strata CIX and CTX IPT/DKT Telephone 11/05 |
