E6581738
■Wiring
Warning
Mandatory
▼Shut off power when installing and wiring this option.
Wait at least 15 minutes and check to make sure that the charge lamp (VF- MB1/S15) is no longer lit.
▼Electrical construction work must be done by a qualified expert.
Installation or connection of input power by someone who does not have that expert knowledge may result in fire or electric shock.
■Operations
Warning
Prohibited
▼Do not touch switches when the hands are wet and do not try to clean the drive with a damp cloth.
Doing so could result in electric shock.
▼Do not pull on any cable it self.
Doing so could result in damage or malfunction.
■Cautions for the communication
Warning
▼Do not set the value that exceeds an effective range as data.
Prohibited | The motor may suddenly restart or stop and that could result in injury. | |
| ||
|
| |
| ▼ Check PROFIBUS state (using below status word bit) when the option unit is | |
Mandatory | deactivated by an unusual event such as an operating error, power outage, failure, etc. | |
- ZSW Status Word Bit 3 (Fault), Bt 7 (Warning) | ||
| ||
| (The communication error occurs when "1" as value or this value cannot be read.) | |
| Deactivated option unit may cause an accident, if the PROFIBUS state is not checked. |
▼Make sure that the operation signals are STOP before clearing the drive’s fault. The motor may suddenly start and that may result in injuries.
■Disposal
Caution
Mandatory
▼For safety's sake, do not dispose of the disused drive yourself but ask an industrial waste disposal agent (*).
If the collection, transport and disposal of industrial waste is done by someone who is not licensed for that job, it is a punishable violation of the law. (Laws in regard to cleaning and processing of waste materials)
(*) Persons who specialize in the processing of waste and known as “industrial waste product collectors and transporters” or “industrial waste disposal persons.”
- 4 -
