-117-
2) Interface Bandwidth
Choose the menu Network→WAN→WAN 1 to load the configuration page. Configure the Upstream
Bandwidth and Downstream Bandwidth of the interface as Figure 4-9 shows. The entered
bandwidth value should be consistent with the actual bandwidth value.
3) Bandwidth Control Rule
Choose the menu Advanced→Traffic Control→Bandwidth Control to load the configuration page.
Then continue with the following settings:
Settings:
Direction: LAN -> WAN1
Group: group1
Mode: Individual
Guaranteed Bandwidth (Up/Down): 100
Limited Bandwidth (Up/Down): 800
Effective Time: Keep the default value
Status: Activate
Click the <Add> button to apply.
Figure 4-10 Bandwidth Control Rule
4.2.2.4 Session Limit Choose the menu Advanced→Session Limit→Session Limit to load the configuration page. Check
the box before Enable Session Limit and click the <Save> button to apply. Then continue with the
following settings:
Settings:
Group: group1