TP-LINK # sys restore | TP-Link TL-ER5120 instruction

TP-LINK # sys reboot

This command will reboot system, Continue?[Y/N]

TP-LINK # sys restore

This command will restore system, Continue?[Y/N]

TP-LINK # sys export config

Server address: [192.168.1.101]192.168.1.100

Username: [admin]ftp

Password: [admin]ftp

File name: [config.bin]

Reboot the system. Y means YES, N means NO.

Restore to factory default. Y means YES, N means NO.

Export the configuration file.

Example: There is a FTP server with IP address of 192.168.1.100 and both the user name and password of which is ftp. To save the current configuration file with the default name as config.bin to this FTP server, follow the configuration on the left.

Try to save the configuration file < config.bin > ...

Save configuration file < config bin > succeed, file size is 7104 bytes.

Note:

●FTP service is required for importing or exporting configuration files and system upgrade. The parameter Server address is the IP address of the host to provide FTP service, Username/Password is the Username/Password to login the FTP service and File name is the name of the configuration file (change the file name if the configuration file with the same name is existed).

●The parameters in the brackets are default setting and you can enter the actual parameters behind them. Press Enter key directly if there are no changes.

●TL-ER5120 connects to the FTP server using port 21 by default.

●Pay special attention that the specified account must be with appropriate permissions since the functions such as export, import and firmware upgrade require read-write operation on FTP server.

-131-

Image 136

TP-Link TL-ER5120 manual TP-LINK # sys restore

Contents

TL-ER5120 Gigabit Load Balance Broadband Router Copyright & Trademarks FCC Statement Contents Application 111 136 Hardware Specifications 135Glossary 138 Package Contents Conventions Intended ReadersOverview of this Guide Page Overview of the Router Features Easy-to-useHardware Basic Functions Appearance Front PanelSecurity LEDs Reset button Power SocketRear Panel Interface Description Please use only the power cord provided with this Router Network Status System Mode StatusPage NAT Mode WAN Mode Non-NAT ModeClassic Mode ¾ WAN Mode 3.2 WAN1 Static IP WAN Static IP Following items are displayed on this screen ¾ Static IP Dynamic IP Bandwidth¾ Dynamic IP Connection Type Host NameGet IP Address by Unicast IP Address PPPoE ¾ PPPoE Settings WAN PPPoE Following items are displayed on this screen Password Active ModeSettings Service Name Downstream Bandwidth Subnet Address¾ PPPoE Status L2TP ¾ L2TP Settings 10 WAN L2TP Following items are displayed on this screen Default Gateway Server IPSecondary Connections ¾ L2TP Status Primary DNS/Secondary DNS Upstream Bandwidth DownstreamStatus IP Address Primary DNS Secondary DNS ¾ Pptp Settings 11 WAN Pptp Following items are displayed on this screen Account Name Primary DNS/Secondary DNS¾ Pptp Status BigPond ¾ BigPond Settings ¾ BigPond Status 4 LAN 4.1 LAN ¾ Dhcp Settings Dhcp Dhcp Client Dhcp Reservation ¾ Dhcp Reservation ¾ List of Reserved Address 5 DMZ 5.1 DMZ ¾ DMZ MAC AddressMode Set the MAC Address for LAN port Set the MAC Address for WAN portSet the MAC Address for DMZ port ¾ MAC Address Statistics Switch¾ Statistics Port Mirror ¾ General ¾ Port Mirror Rate Control Application Example Port Config ¾ Rate Control ¾ Port Config Port Status Port Vlan User Group¾ Port Vlan ¾ Group Config GroupUser ¾ List of Group ¾ User Config View¾ List of User Group Name Select the name of the desired Group Advanced NAT Setup1 NAT One-to-One NAT Mapping IP AddressInterface DMZ Forwarding Multi-Nets NAT ¾ Multi-Nets NAT Application Example Network Requirements Configuration procedure ¾ Virtual Server Virtual ServerProtocol Port Triggering 1.6 ALG ¾ Port Triggering Setup Traffic Control¾ ALG 323 ALG Use ¾ Interface Bandwidth Bandwidth Control Guaranteed DirectionGroup Bandwidth Up Limited Bandwidth Session Limit Session Limit Configuration Load BalanceSession List ¾ Session Limit Policy Routing 39 Policy Routing Link Backup WAN 40 Link Backup Following items are displayed on this screen Backup ProtocolTiming Failover Routing Static Route¾ Protocol ¾ List of Protocol ¾ Static Route Metric Description Status 5.2 RIP 43 RIP Following items are displayed on this screen Route Table ¾ List of RIP Anti ARP Spoofing FirewallIP-MAC Binding ¾ IP-MAC Binding ARP Scanning 46 ARP Scanning Attack Defense ARP List ¾ General Not sure MAC Filtering¾ MAC Filtering Access Control URL Filtering ¾ URL Filtering Rule Object Access Rules Web Filtering Service ¾ Access RulesPolicy Source Group on3.2.1 GroupDestination Priority Service 53 Service App Control Control RulesName Dest. Port ¾ Control Rules Application PPPoE Server ServicesDatabase General PPPoE User IsolationPrimary/Secondary Max Sessions IP Address Pool Account ¾ IP Address PoolPool Name IP Address Range ¾ Account Expiration Date Status MAC Binding MAC Address Session Timeout Exceptional IP¾ List of Account ¾ Exceptional IP List of Account BulletinIP Address Range Description Status Enable E-Bulletin Enable LogsInterval ¾ E-Bulletin Dynamic DNS Content Object Effective Time Publisher Description Status¾ List of E-Bulletin Ddns Service DynDNS¾ Dyndns Ddns Domain Name ¾ List of DynDNS Account No-IP¾ No-IP Ddns ¾ List of No-IP Account PeanutHull¾ PeanutHull Ddns ¾ List of PeanutHull Account Comexe¾ Comexe Ddns UPnP ¾ List of Comexe Account Maintenance Admin SetupAdministrator ¾ List of UPnP Mapping Login Parameter ¾ Administrator Application Example Network Requirements Factory Defaults ManagementRemote Management ¾ Remote Management Reboot ¾ Configuration VersionExport and Import ¾ Export Statistics Firmware UpgradeInterface Traffic Statistics IP Traffic Statistics ¾ Interface Traffic Statistics¾ Advanced WAN Information Interface Displays the interface IP Fragment Rx Diagnostics DiagnosticsEnable IP Traffic Statistics Enable Auto-refresh 76 Diagnostics Following items are displayed on this screen ¾ Ping ¾ Tracert Online DetectionDetecting Time Port Displays the detected WAN port DetectionWAN Status Display the detecting results System Time Logs Get GMTManual Synchronize With Send System Logs Level Description Internet Setting ConfigurationsNetwork Requirements System Mode Internet Connection WAN Static IP Settings Network ManagementUser Group Group App Control View Enable Bandwidth Control App Rules Interface Bandwidth Bandwidth Control Rule LAN ARP Defense Network SecurityScan and import the entries to ARP List Set IP-MAC Binding Entry Manually Set Attack Defense WAN ARP Defense Attack Defense Traffic Monitoring Port Mirror 17 Port Mirror StatisticsPage Configuration CLIPage Connection Properties Settings 126 Interface Mode Mode Accessing Path Prompt Logout or Access the next Admin Online Help Command Introduction Get Get the ip configuration 1 ip Ip-mac3 sys TP-LINK # sys restore TP-LINK # sys import config TP-LINK user set password Enter old password History Exit Power StandardsPorts Transmission Medium Appendix B FAQ Page Appendix C Glossary Glossary Description Allows dissimilar communication devices to communicate By the Ieee Glossary Description