| connection. Dynamic IP and Static IP connection | ||||||
| types are provided. |
|
|
|
| ||
Connection Type: | Select the secondary connection type. Options | ||||||
| include Disable, Dynamic IP and Static IP. |
| |||||
IP Address: | If Static IP is selected, configure the IP address of | ||||||
| WAN port. If Dynamic IP is selected, the obtained IP | ||||||
| address of WAN port is displayed. |
|
|
| |||
Subnet Address: | If Static IP is selected, configure the subnet address of | ||||||
| WAN port. If Dynamic IP is selected, the obtained | ||||||
| subnet address of WAN port is displayed. |
| |||||
Status: | Displays the status of secondary connection. |
| |||||
Upstream Bandwidth: | Specify the bandwidth for transmitting packets on the | ||||||
| port. |
|
|
|
|
|
|
Downstream Bandwidth: | Specify the bandwidth for receiving packets on the | ||||||
| port. |
|
|
|
|
|
|
¾ PPPoE Status |
|
|
|
|
|
|
|
Status: | Displays the status of PPPoE connection. |
| |||||
| z “Disabled” indicates that the PPPoE connection | ||||||
|
| type is not applied. |
|
|
|
| |
| z | “Connecting” | indicates | that | the | Router | is |
|
| obtaining the IP parameters from your ISP. |
| ||||
| z | “Connected” | indicates | that | the | Router | has |
|
| successfully obtained the IP parameters from | |||||
|
| your ISP. |
|
|
|
|
|
z “Disconnected” indicates that the connection has been manually terminated or the request of the Router has no response from your ISP. Please ensure that your settings are correct and your network is connected well. Consult your ISP if