-24-
not clear, please consult your ISP.
Password: Enter the Password provided by your ISP.
Server IP: Enter the Server IP provided by your ISP.
MTU: MTU (Maximum Transmission Unit) is the maximum data
unit transmitted by the physical network. It can be set in
the range of 576-1460. The default MTU is 1460. It is
recommended to keep the default value if no other MTU
value is provided by your ISP.
Active Mode: You can select the proper Active Mode according to your
need.
z Manual: Select this option to manually activate or
terminate the Internet connection by the <Connect>
or <Disconnect> button. It’s optimum for the dial-up
connection charged on time.
z Always-on: Select this option to keep the connection
always on. The connection can be re-established
automatically when it is down.
Secondary
Connections:
Here allows you to configure the secondary connection.
Dynamic IP and Static IP connection types are provided.
Connection Type: Select the secondary connection type. Options include
Disable, Dynamic IP and Static IP.
IP Address: If Static IP is selected, configure the IP address of WAN
port. If Dynamic IP is selected, the IP address of WAN
port obtained is displayed.
Subnet Mask: If Static IP is selected, configure the subnet mask of WAN
port. If Dynamic IP is select, the subnet mask of WAN
port obtained is displayed.
Default Gateway: If Static IP is selected, configure the default gateway. If
Dynamic IP is selected, the obtained default gateway is
displayed.