Connection Type, Host Name, Get IP Address by | TP-Link TL-ER5120

Connection Type:	Select Dynamic IP if your ISP assigns the IP address
	automatically. Click <Obtain> to get the IP address
	from your ISP’s server. Click <Release> to release the
	current IP address of WAN port.
Host Name:	Optional. This field allows you to give a name for the
	Router. It's blank by default.
MTU:	MTU (Maximum Transmission Unit) is the maximum
	data unit transmitted by the physical network. It can
	be set in the range of 576-1500. The default MTU is
	1500. It is recommended to keep the default value if
	no other MTU value is provided by your ISP.
Get IP Address by	The broadcast requirement may not be supported by
Unicast:	a few ISPs. Select this option if you can not get the IP
	address from your ISP even with a normal network
	connection. This option is not required generally.
Use the following DNS	Select this option to enter the DNS (Domain Name
Server:	Server) address manually.
Primary DNS:	Enter the IP address of your ISP’s Primary DNS
	(Domain Name Server). If you are not clear, please
	consult your ISP.

Secondary DNS:

Upstream Bandwidth:

Downstream

Bandwidth:

¾Dynamic IP Status

Status:

Optional. If a Secondary DNS Server address is available, enter it.

Specify the bandwidth for transmitting packets on the port.

Specify the bandwidth for receiving packets on the port.

Displays the status of obtaining an IP address from

-17-

Image 22

TP-Link TL-ER5120 manual Connection Type, Host Name, Get IP Address by, Unicast, Use the following DNS, Server, Primary DNS

Contents

TL-ER5120 Gigabit Load Balance Broadband Router Copyright & Trademarks FCC Statement Contents Application 111 136 Hardware Specifications 135Glossary 138 Package Contents Conventions Intended ReadersOverview of this Guide Page Overview of the Router Hardware FeaturesEasy-to-use Basic Functions Security AppearanceFront Panel LEDs Rear Panel Reset buttonPower Socket Interface Description Please use only the power cord provided with this Router Network Status System Mode StatusPage NAT Mode Classic Mode WAN ModeNon-NAT Mode ¾ WAN Mode 3.2 WAN1 Static IP WAN Static IP Following items are displayed on this screen ¾ Static IP Dynamic IP Bandwidth¾ Dynamic IP Get IP Address by Connection TypeHost Name Unicast IP Address PPPoE ¾ PPPoE Settings WAN PPPoE Following items are displayed on this screen Settings PasswordActive Mode Service Name Downstream Bandwidth Subnet Address¾ PPPoE Status L2TP ¾ L2TP Settings 10 WAN L2TP Following items are displayed on this screen Secondary Default GatewayServer IP Connections ¾ L2TP Status Primary DNS/Secondary DNS Upstream Bandwidth DownstreamStatus IP Address Primary DNS Secondary DNS ¾ Pptp Settings 11 WAN Pptp Following items are displayed on this screen Account Name ¾ Pptp Status PrimaryDNS/Secondary DNS BigPond ¾ BigPond Settings ¾ BigPond Status 4 LAN 4.1 LAN ¾ Dhcp Settings Dhcp Dhcp Client Dhcp Reservation ¾ Dhcp Reservation ¾ List of Reserved Address 5 DMZ 5.1 DMZ ¾ DMZ MAC AddressMode Set the MAC Address for DMZ port Set the MAC Address for LAN portSet the MAC Address for WAN port ¾ MAC Address Statistics Switch¾ Statistics Port Mirror ¾ General ¾ Port Mirror Rate Control Application Example Port Config ¾ Rate Control ¾ Port Config Port Status Port Vlan User Group¾ Port Vlan User ¾ Group ConfigGroup ¾ List of Group ¾ List of User ¾ User ConfigView Group Name Select the name of the desired Group Advanced NAT Setup1 NAT Interface One-to-One NATMapping IP Address DMZ Forwarding Multi-Nets NAT ¾ Multi-Nets NAT Application Example Network Requirements Configuration procedure ¾ Virtual Server Virtual ServerProtocol Port Triggering 1.6 ALG ¾ Port Triggering ¾ ALG SetupTraffic Control 323 ALG Use ¾ Interface Bandwidth Bandwidth Control Group GuaranteedDirection Bandwidth Up Limited Bandwidth Session Limit Session Limit Session List ConfigurationLoad Balance ¾ Session Limit Policy Routing 39 Policy Routing Link Backup WAN 40 Link Backup Following items are displayed on this screen Timing BackupProtocol Failover ¾ Protocol RoutingStatic Route ¾ List of Protocol ¾ Static Route Metric Description Status 5.2 RIP 43 RIP Following items are displayed on this screen Route Table ¾ List of RIP Anti ARP Spoofing FirewallIP-MAC Binding ¾ IP-MAC Binding ARP Scanning 46 ARP Scanning Attack Defense ARP List ¾ General Not sure MAC Filtering¾ MAC Filtering Access Control URL Filtering ¾ URL Filtering Rule Object Access Rules Web Filtering Service ¾ Access RulesPolicy Destination SourceGroup on3.2.1 Group Priority Service 53 Service Name App ControlControl Rules Dest. Port ¾ Control Rules Application PPPoE Server ServicesDatabase Primary/Secondary GeneralPPPoE User Isolation Max Sessions IP Address Pool Pool Name Account¾ IP Address Pool IP Address Range ¾ Account Expiration Date ¾ List of Account Status MAC Binding MAC Address Session TimeoutExceptional IP ¾ Exceptional IP List of Account BulletinIP Address Range Description Status Interval Enable E-BulletinEnable Logs ¾ E-Bulletin Dynamic DNS Content Object Effective Time Publisher Description Status¾ List of E-Bulletin ¾ Dyndns Ddns Ddns ServiceDynDNS Domain Name ¾ List of DynDNS Account No-IP¾ No-IP Ddns ¾ List of No-IP Account PeanutHull¾ PeanutHull Ddns ¾ List of PeanutHull Account Comexe¾ Comexe Ddns UPnP ¾ List of Comexe Account Administrator MaintenanceAdmin Setup ¾ List of UPnP Mapping Login Parameter ¾ Administrator Application Example Network Requirements Remote Management Factory DefaultsManagement ¾ Remote Management Export and Import Reboot¾ Configuration Version ¾ Export Statistics Firmware UpgradeInterface Traffic Statistics ¾ Advanced WAN Information IP Traffic Statistics¾ Interface Traffic Statistics Interface Displays the interface IP Fragment Rx Enable IP Traffic DiagnosticsDiagnostics Statistics Enable Auto-refresh 76 Diagnostics Following items are displayed on this screen ¾ Ping ¾ Tracert Online DetectionDetecting WAN Status Display the detecting results TimePort Displays the detected WAN port Detection System Time Manual LogsGet GMT Synchronize With Send System Logs Level Description Internet Setting ConfigurationsNetwork Requirements System Mode Internet Connection WAN Static IP User Group SettingsNetwork Management Group App Control View Enable Bandwidth Control App Rules Interface Bandwidth Bandwidth Control Rule LAN ARP Defense Network SecurityScan and import the entries to ARP List Set IP-MAC Binding Entry Manually Set Attack Defense WAN ARP Defense Attack Defense Traffic Monitoring Port Mirror 17 Port Mirror StatisticsPage Configuration CLIPage Connection Properties Settings 126 Interface Mode Mode Accessing Path Prompt Logout or Access the next Admin Online Help Command Introduction Get Get the ip configuration 1 ip Ip-mac3 sys TP-LINK # sys restore TP-LINK # sys import config TP-LINK user set password Enter old password History Exit Ports PowerStandards Transmission Medium Appendix B FAQ Page Appendix C Glossary Glossary Description Allows dissimilar communication devices to communicate By the Ieee Glossary Description