IP Address, PPPoE | TP-Link TL-ER5120 specs

your ISP.

z“Disabled” indicates that the Dynamic IP connection type is not applied.

z“Connecting” indicates that the Router is obtaining the IP parameters from your ISP.

z“Connected” indicates that the Router has successfully obtained the IP parameters from your ISP.

z“Disconnected” indicates that the IP address has been manually released or the request of the Router gets no response from your ISP. Please check your network connection and consult your ISP if this problem remains.

IP Address:

Displays the IP address assigned by your ISP.

Subnet Mask: Displays the Subnet Mask assigned by your ISP.

Gateway Address: Displays the Gateway Address assigned by your ISP.

Primary DNS: Displays the IP address of your ISP’s Primary DNS.

Secondary DNS: Displays the IP address of your ISP’s Secondary DNS.

3)PPPoE

If your ISP (Internet Service Provider) has provided the account information for the PPPoE connection, please choose the PPPoE connection type (Used mainly for DSL Internet service).

-18-

Image 23

TP-Link TL-ER5120 manual IP Address, PPPoE

Contents

TL-ER5120 Gigabit Load Balance Broadband Router Copyright & Trademarks FCC Statement Contents 111 Application Glossary 138 Hardware Specifications 135136 Package Contents Overview of this Guide Intended ReadersConventions Page Overview of the Router Basic Functions FeaturesEasy-to-use Hardware LEDs AppearanceFront Panel Security Interface Description Reset buttonPower Socket Rear Panel Please use only the power cord provided with this Router Status Network Status System ModePage NAT Mode ¾ WAN Mode WAN ModeNon-NAT Mode Classic Mode Static IP 3.2 WAN1 ¾ Static IP WAN Static IP Following items are displayed on this screen ¾ Dynamic IP BandwidthDynamic IP Unicast Connection TypeHost Name Get IP Address by PPPoE IP Address WAN PPPoE Following items are displayed on this screen ¾ PPPoE Settings Service Name PasswordActive Mode Settings ¾ PPPoE Status Subnet AddressDownstream Bandwidth L2TP 10 WAN L2TP Following items are displayed on this screen ¾ L2TP Settings Connections Default GatewayServer IP Secondary Status IP Address Primary DNS Secondary DNS Primary DNS/Secondary DNS Upstream Bandwidth Downstream¾ L2TP Status 11 WAN Pptp Following items are displayed on this screen ¾ Pptp Settings Account Name BigPond PrimaryDNS/Secondary DNS ¾ Pptp Status ¾ BigPond Settings ¾ BigPond Status 4.1 LAN 4 LAN Dhcp ¾ Dhcp Settings Dhcp Reservation Dhcp Client ¾ List of Reserved Address ¾ Dhcp Reservation 5.1 DMZ 5 DMZ Mode MAC Address¾ DMZ ¾ MAC Address Set the MAC Address for LAN portSet the MAC Address for WAN port Set the MAC Address for DMZ port ¾ Statistics SwitchStatistics Port Mirror ¾ Port Mirror ¾ General Application Example Rate Control ¾ Rate Control Port Config Port Status ¾ Port Config ¾ Port Vlan User GroupPort Vlan ¾ List of Group ¾ Group ConfigGroup User Group Name Select the name of the desired Group ¾ User ConfigView ¾ List of User 1 NAT NAT SetupAdvanced DMZ Forwarding One-to-One NATMapping IP Address Interface ¾ Multi-Nets NAT Multi-Nets NAT Application Example Network Requirements Configuration procedure Protocol Virtual Server¾ Virtual Server Port Triggering ¾ Port Triggering 1.6 ALG 323 ALG SetupTraffic Control ¾ ALG ¾ Interface Bandwidth Use Bandwidth Control Bandwidth Up Limited Bandwidth GuaranteedDirection Group Session Limit Session Limit ¾ Session Limit ConfigurationLoad Balance Session List 39 Policy Routing Policy Routing WAN Link Backup 40 Link Backup Following items are displayed on this screen Failover BackupProtocol Timing ¾ List of Protocol RoutingStatic Route ¾ Protocol Metric Description Status ¾ Static Route 5.2 RIP 43 RIP Following items are displayed on this screen ¾ List of RIP Route Table IP-MAC Binding FirewallAnti ARP Spoofing ¾ IP-MAC Binding 46 ARP Scanning ARP Scanning ARP List Attack Defense ¾ General ¾ MAC Filtering MAC FilteringNot sure URL Filtering Access Control Object ¾ URL Filtering Rule Web Filtering Access Rules Policy ¾ Access RulesService Priority SourceGroup on3.2.1 Group Destination 53 Service Service Dest. Port App ControlControl Rules Name Application ¾ Control Rules Database ServicesPPPoE Server Max Sessions GeneralPPPoE User Isolation Primary/Secondary IP Address Pool IP Address Range Account¾ IP Address Pool Pool Name Expiration Date ¾ Account ¾ Exceptional IP Status MAC Binding MAC Address Session TimeoutExceptional IP ¾ List of Account IP Address Range Description Status BulletinList of Account ¾ E-Bulletin Enable E-BulletinEnable Logs Interval ¾ List of E-Bulletin Content Object Effective Time Publisher Description StatusDynamic DNS Domain Name Ddns ServiceDynDNS ¾ Dyndns Ddns ¾ No-IP Ddns No-IP¾ List of DynDNS Account ¾ PeanutHull Ddns PeanutHull¾ List of No-IP Account ¾ Comexe Ddns Comexe¾ List of PeanutHull Account ¾ List of Comexe Account UPnP ¾ List of UPnP Mapping MaintenanceAdmin Setup Administrator ¾ Administrator Login Parameter Application Example Network Requirements ¾ Remote Management Factory DefaultsManagement Remote Management ¾ Export Reboot¾ Configuration Version Export and Import Interface Traffic Statistics Firmware UpgradeStatistics Interface Displays the interface IP Fragment Rx IP Traffic Statistics¾ Interface Traffic Statistics ¾ Advanced WAN Information Statistics Enable Auto-refresh DiagnosticsDiagnostics Enable IP Traffic ¾ Ping 76 Diagnostics Following items are displayed on this screen Detecting Online Detection¾ Tracert System Time TimePort Displays the detected WAN port Detection WAN Status Display the detecting results Synchronize With LogsGet GMT Manual Level Description Send System Logs Network Requirements ConfigurationsInternet Setting Internet Connection System Mode WAN Static IP Group SettingsNetwork Management User Group View App Control App Rules Enable Bandwidth Control Bandwidth Control Rule Interface Bandwidth Scan and import the entries to ARP List Network SecurityLAN ARP Defense Set Attack Defense Set IP-MAC Binding Entry Manually Attack Defense WAN ARP Defense Port Mirror Traffic Monitoring Statistics 17 Port MirrorPage CLI ConfigurationPage Connection Properties Settings 126 Mode Accessing Path Prompt Logout or Access the next Interface Mode Online Help Admin Get Get the ip configuration Command Introduction 3 sys Ip-mac1 ip TP-LINK # sys restore TP-LINK # sys import config History TP-LINK user set password Enter old password Exit Transmission Medium PowerStandards Ports Appendix B FAQ Page Glossary Description Appendix C Glossary Allows dissimilar communication devices to communicate By the Ieee Glossary Description