Account Name: Enter the Account Name provided by your ISP. If you are not clear, please consult your ISP.

Password:

 

Enter the Password provided by your ISP.

 

Active Mode:

 

You can select the proper Active mode according to

 

 

your need.

 

 

 

 

 

 

z Manual: Select this option to manually activate or

 

 

terminate the Internet connection by the

 

 

<Connect> or <Disconnect> button. It’s optimum

 

 

for the dial-up connection charged on time.

 

 

z Always-on:

Select

this option

to

keep the

 

 

connection always on. The connection can be

 

 

re-established automatically when it is down.

 

 

z Time-based: Select this option to keep the

 

 

connection on during the Active time you set.

PPPoE

Advanced

Check here to enable PPPoE advanced settings.

Settings:

 

 

 

 

 

 

MTU:

 

MTU (Maximum Transmission Unit) is the maximum

 

 

data unit transmitted by the physical network. It can

 

 

be set in the range of 576-1492. The default MTU is

 

 

1480. It is recommended to keep the default value if

 

 

no other MTU value is provided by your ISP.

ISP Address:

 

Optional. Enter the ISP address provided by your ISP.

 

 

It's null by default.

 

 

 

Service Name:

 

Optional. Enter the Service Name provided by your

 

 

ISP. It's null by default.

 

 

 

Primary DNS:

 

Enter the IP address of your ISP’s Primary DNS.

Secondary DNS:

Optional. Enter the IP address of your ISP’s

 

 

Secondary DNS.

 

 

 

Secondary Connection:

Here allows

you to

configure

the

secondary

 

 

 

-20-

 

 

 

Page 25
Image 25
TP-Link TL-ER5120 manual Password, Active Mode, PPPoE Advanced, Settings, ISP Address, Service Name, Secondary DNS