U-Line 2115R Service and Repair, 3-58, REPLACING MOLD AND HEATER - CO2175F/CO2175DWR, Stripper

Models: 2175R 2115R 2115WC 2175/2275DWRR 2115WCOL 2175BEV 2175WC 2175RF CLR2160 CO2175/CO2275DWR CO2175F CLRCO2175 2275DWRWOL 2175WCOL 2275DWRWS

1 180
Download 180 pages 38.87 Kb
Page 73
Image 73
REPLACING MOLD AND HEATER - CO2175F/CO2175DWR

Section 3 - Service and Repair

REPLACING MOLD AND HEATER - CO2175F/CO2175DWR

1.Remove ice maker assembly. Refer to Replacing Ice Maker Assembly.

2.Remove one stripper screw (Figure 61) and stripper.

3.Remove three face plate screws and face plate.

4.Remove one screw and detach limit switch from mold.

5.Detach heater leads.

6.Remove two screws and mold from support housing.

7.To assemble, replace parts in reverse order.

8.Install the ice maker assembly.

 

Mold and support

 

 

housing screws

 

 

 

Stripper
Face plate

 

 

screw

 

 

 

Heater leads

 

Face plate

ULIN_0374_A

screws
Limit switch

 

 

screw

 

Figure 61

3-58

Page 73
Image 73
U-Line 2115R Service and Repair, 3-58, REPLACING MOLD AND HEATER - CO2175F/CO2175DWR, Mold and support, housing screws