U-Line 2115WC, 2275DWRWS, 2175WCOL, CLRCO2175 Service and Repair, 3-57, Replacing Ice Maker, Figure

Models: 2175R 2115R 2115WC 2175/2275DWRR 2115WCOL 2175BEV 2175WC 2175RF CLR2160 CO2175/CO2275DWR CO2175F CLRCO2175 2275DWRWOL 2175WCOL 2275DWRWS

1 180
Download 180 pages 38.87 Kb
Page 72
Image 72
REPLACING ICE MAKER

Section 3 - Service and Repair

REPLACING ICE MAKER

1.Unplug unit.

2.Disconnect ice maker wire harness at plug (Figure 60).

3.Disconnect thermistor plug.

4.Remove water inlet tube.

5.Remove front cover.

6.Advance ejector blade to the 3 o’clock position by turning the 5/ 16" hex head on the small brass gear counterclockwise.

7.Remove three screws from wall of freezer housing.

8.Remove ice maker assembly.

9.Install new ice maker assembly.

10.Reconnect plug.

11.Reconnect thermistor plug.

12.Insert water inlet tube.

13.Apply Permagum® to all exit holes.

14.Install back panel.

15.Plug in unit and test.

Figure 60

3-57

Page 72
Image 72
U-Line 2115WC, 2275DWRWS, 2175WCOL, 2275DWRWOL, CLRCO2175, CO2175F, 2115R Service and Repair, 3-57, Replacing Ice Maker, Figure