U-Line 2115WCOL, 2275DWRWS, 2175WCOL, 2275DWRWOL, CLRCO2175 Customer Call Guide, Troubleshooting

Models: 2175R 2115R 2115WC 2175/2275DWRR 2115WCOL 2175BEV 2175WC 2175RF CLR2160 CO2175/CO2275DWR CO2175F CLRCO2175 2275DWRWOL 2175WCOL 2275DWRWS

1 180
Download 180 pages 38.87 Kb
Page 10
Image 10
Section 2 - Troubleshooting

Section 2 - Troubleshooting

CUSTOMER CALL GUIDE

The following guide has been developed to help answer frequently asked questions. It can be used by persons

scheduling service calls. Things to consider before scheduling a service call:

Concern

Response

 

 

The unit is not cold enough.

• Are you familiar with the factory temperature specifications for

 

your unit? Many factors can cause these temperatures to vary;

 

ambient temperature, application, amount of use (number of times

 

and length of time the door or drawers or opened and closed),

 

etc.

 

• Is the door or drawers sealing properly? If the door or drawer is

 

not sealed properly, it allows heat into the unit. U-Line’s warranty

 

is 90 days for door or drawer adjustments.

 

• Has the door or drawers been left open?

 

• Is the condenser clean? U-Line’s warranty does not cover cleaning

 

the condenser.

 

• Is the unit behind closed doors or the vent restricted? The front

 

grille must be free of obstruction.

 

• Is the unit in an application of heavy usage? Heavy usage or high

 

ambient temperatures will cause a unit to frost up.

 

• Did you try adjusting the temperature to a colder level? Adjust to

 

a colder level. Be sure to allow 24 hours between temperature

 

control adjustments.

 

 

Temperature is too cold.

Check actual temperature versus set-point.

 

 

The unit is frosting up.

• Are you familiar with the defrost technology of your unit?

 

• Is the door or drawers sealing properly? If the door or drawer

 

is not sealing properly, it allows heat/humidity into the unit.

 

U-Line’s warranty is 90 days for door or drawer adjustments.

 

• Has the door or drawers been left open?

 

• Is the unit in an application of heavy usage? Heavy usage or high

 

ambient temperatures will cause a unit to frost up.

 

 

The ice cubes are sticking together.

• Is the door or drawers sealing properly? This could cause the ice

 

cubes to stick together.

 

• Have you tried to shake the ice bucket? If the ice sits without

 

being used, it will tend to stick together. Shaking the bucket will

 

usually break the ice cubes apart. If the ice has been sitting for a

 

long time, you should consider discarding it and make a fresh

 

batch.

 

• Does the unit need to be defrosted?

 

 

Water is leaking out of the unit.

Have you checked the water connection to the unit? U-Line’s

 

warranty does not cover installation adjustments.

 

 

No ice or not enough ice.

• Are you aware of the factory specifications for ice production?

 

• Is the ice maker bin arm down? When the arm is up, the ice

 

maker will not make ice.

 

• Is the door or drawers sealing properly? U-Line’s warranty is 90

 

days for door adjustments.

 

• Has the ice maker been turned off at the display?

 

 

2-1

Page 10
Image 10
U-Line 2115WCOL, 2275DWRWS, 2175WCOL, 2275DWRWOL, CLRCO2175, CO2175F, CO2175/CO2275DWR Customer Call Guide, Troubleshooting