U-Line CLRCO2175 Service and Repair, 3-63, Figure, Standpipe P60 Pump Required, Y-BranchTailpiece

Section 3 - Service and Repair

10. Once pushed completely into the opening finish routing the drain

tubing to the desired location. Common installations use a floor

drain, standpipe, garbage disposal, or Y-branch tailpiece-type drain

connection (Figure 73 - 76). After the installation is complete,

Standpipe

P60 Pump Required

check the unit to ensure it is level both side to side and front to

back. For disposal connections an optional adapter may be

required (included with the kit) to adapt from the 7/8" connection.

11. For the gravity/floor drain or the standpipe drains it is important to

secure the drain tubing to those items to prevent it from coming

loose. For the disposal or

Y-branch tailpiece connections press the drain tube over the

barbed end on the connector. Make sure the knockout inside the

tailpiece has been removed for both types of connections. Attach

these two with a worm drive hose clamp. Depending on the size of

the

Air gap must be left between drain line and water level.

Waste

Shut-Off

Valve

Cold

Hot Water

Water

Y-branch or disposer fitting an adapter may be needed to interface

between the 5/8" hose and connection.

12. After all connections have been completed turn the unit to the ON

position. Pour one gallon of water into the ice bin and check all drain

connections for leaks. During this time also ensure that the water

flows from the bin. If the water does not flow from the bin there

may be a problem with the drain connection such as kinks or

improper slope. If your unit has a drain pump an indicator of P1 on

the display will alert to a slow or clogged drain. If any problems are

found, retrace the drain connection, correct the issue and retest

with water.

Y-Branch Tailpiece
P60 Pump Required
Air Gap
(Optional Hook-Up)
	Waste
	Shut-Off
	Valve
	Cold
Hot	Water
Water
ULIN_0600a_A

Figure 73

WasteULIN_0598a_A

Figure 74

Disposal
P60 Pump	Air Gap
Required	(Optional Hook-Up)
		Waste
		Cold
	Hot	Water
	Water
		Shut-Off
		Valve
	ULIN_0599a_A

Figure 75

Floor Drain
Air gap must
be left between		Waste
drain line and		Shut-Off
water level.
		Valve
		Cold
	Hot	Water
	Water
Waste	ULIN_0597a_A

Figure 76

3-63