Before use (continued)
Storing and handling cards after printing
Avoid storing the cards in locations exposed to direct sunlight or with high humidity.
Furthermore, avoid contact with the following chemicals and stationery, as they can cause discoloration or fading of the cards:
•Organic solvents such as alcohol, film cleaner, diazo copies, etc.
•Soft vinyl chlorides, document cases, pass holders, erasers, etc.
•
Purchasing print media and cards
Contact your dealer regarding the purchase of print media (retransfer film and ink ribbons) and cards. Always use the products specified below.
Print media
Use only the ink ribbons and retransfer film specified for this unit. For the names of these products refer to “Main Specifications” on p. 46 of this manual.
CAUTION
We can accept no liability for any problems arising as a result of the use of media using materials other than those specified.
Card material
ISO/IEC 7810 type ID1 (dimensions) :
| equivalent product |
ISO/IEC | |
| equivalent product |
ISO/IEC 7816 (IC card) : | equivalent product |
The materials of some cards may not be suitable for printing. Consult your dealer regarding the materials to be used and specifications required before purchase.
8
Installation
The performance of the card printer is strongly influenced by the installation location. Do not install in the following kinds of location:
•Dusty locations
Use the card printer in clean locations such as general offices where no problems are encountered using computers. Using the printer in dusty locations can cause blurrings of the print and printing head malfunctions. Avoid the following kinds of location:
•Locations susceptible to strong vibration or shock
•Locations exposed to direct sunlight
•Locations where there is a possibility of metal objects and other foreign material entering the unit
•Areas near walls with little ventilation
•Unstable locations and angled surfaces
•Locations prone to static electricity, such as a carpeted room
•Areas near air conditioners, humidifiers, stoves, etc. that may cause condensation within the printer
The printer is to be installed in an environment with the following temperature and humidity.
Temperature : 15°C to 30°C
Humidity : 35% to 70%
CAUTION
Use of the printer in an environment with temperatures lower than the above range may cause retransfer errors and use of the printer in an environment with temperatures higher than the above range may cause print errors from deformation of the cards and wrinkling of the film.
Installation diagram
Ventilation holes are provided for the cooling fan on the bottom and sides of the unit. Avoid inserting any object into the gap between the bottom of the unit and the top of the stand. Install the unit with its sides kept away from the surrounding wall as illustrated in the diagram, and keep the back of the unit at least 10cm away from the wall. Also, do not place any object on top of the unit.
Do not place objects on top
20cm or | 20cm or |
more | more |
