www.unicomlink.com | UNICOM |
5-4-5-3. State Activity
Active (selection): The port automatically sends LACP protocol packets.
Passive (no selection): The port does not automatically send LACP protocol packets and responds only if it receives LACP protocol packets from the opposite device.
1.A link having either two active LACP ports or one active port can perform dynamic LACP trunking. A link that has two passive LACP ports will not perform dynamic LACP trunking because both ports are waiting for the LACP protocol packet from the opposite device.
2.If LACP is active, when you select your trunking ports, they will automatically be set to active status.
5-4-6. Forwarding and Filtering
58
