Edit / Delete a Vlan Group | UNICOM Electric SmartGST-2402M guide

UNICOM

SmartGST-2402M

NOTE: If a trunk group exists, you can see it (ex: TRK1, TRK.) after port 26 and configure it whether it is a member of the VLAN or not.

Actions->

<Quit>: Exit this page and return to previous menu.

<Edit>: Configure all items. When finished with configuration press ESC to go back to the action menu line.

<Save>: Save all configured values.

<Previous Page>: Return to previous page.

<Next page>: Go to next page.

4-3-4-3. Edit / Delete a VLAN Group

This page allows users to edit or delete a VLAN group.

1.Press <Edit> or <Delete> item.

2.Choose the VLAN group that you want to edit or delete and then press Enter.

3.Users can modify the VLAN item protocol and mark the member ports as either tagged or un-tagged. Member ports can also be removed from this VLAN group.

4.After editing or deleting VLAN, press <Save> to save all configured values.

NOTE: 1. The VLAN Name and VLAN ID cannot be modified. 2. The default VLAN cannot be deleted.

23

Image 24

UNICOM Electric SmartGST-2402M manual Edit / Delete a Vlan Group, Press Edit or Delete item

Contents

Features Introduction SmartGST-2402M Software Features Package Contents Ethernet Switching Technology Front Panel Power Status Description Desktop Installation Rear PanelAttaching Rubber Feet Rack-mounted Installation Attach mounting brackets with screws Power On Small Workgroup Segment Bridge Small Workgroup Application Connecting to the Switch Login in the Console Interface Main Menu Main MenuStatus and Counters Port Status Port Counters System Information Actions Switch Static Configuration Administration Configuration Device Information IP Configuration Change Username Change Password Port Configuration Port Trunk Configuration Port Mirroring Configuration Vlan Configuration Vlan Configure Create a Vlan Group Create 802.1Q Vlan Edit / Delete a Vlan Group Press Edit or Delete item Groups Sorted Mode Priority Configuration MAC Address Configuration Static MAC Address Press Edit Misc. Configuration Filtering MAC Address Edit Filtering MAC address Broadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm STP Enable System Configuration Perport Configuration Snmp Snmp System Options Community Strings Add Community NameEdit Community Name Press Add Edit key Delete Community Name Trap Managers Press Space to choose Enabled / Disabled Add the trap managerDelete trap manager Press Delete Working Ports Setting Lacp Lacp State Activity Lacp Status 5-1 .1X Enable System Configuration Per Port Configuration Miscellaneous Configuration Reboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Tftp Backup Configuration Xmodem Upgrade Web-Based Management About Web-based Management System Login Web Management Function Web Management Overview Unicom Administrator Port StatisticsIP Address Switch Setting Basic Advanced and Miscellaneous Setting Priority Queue Service settings Miscellaneous Setting Collisions Retry Forever Unicom Console Port Information Port Controls Trunking Aggregator setting Aggregator Information State Activity Forwarding and Filtering Igmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Basic Create a Vlan and add tagged member ports to it Configure port VID settings Port VID Ingress Filtering Acceptable Frame type Port Mirroring Snmp Security Manager Trap Manager System Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI