Port VID | UNICOM Electric SmartGST-2402M specification

www.unicomlink.com

UNICOM

7. Use this page to set the outgoing frames as VLAN-Tagged frames. Click Apply.

Tag: outgoing frames are VLAN-Tagged.

Untag: outgoing frames are not VLAN-Tagged.

_Port VID

Configure port VID settings

From the main 802.1Q VLAN page, click Port VLAN ID for Settings.

66

Image 67

UNICOM Electric SmartGST-2402M manual Port VID, Configure port VID settings

Contents

Introduction Features SmartGST-2402M Software Features Package Contents Front Panel Ethernet Switching Technology Status Description Power Rear Panel Desktop InstallationAttaching Rubber Feet Attach mounting brackets with screws Rack-mounted Installation Small Workgroup Power On Small Workgroup Application Segment Bridge Login in the Console Interface Connecting to the Switch Main Menu Main MenuStatus and Counters Port Counters Port Status Actions System Information Administration Configuration Switch Static Configuration Device Information Change Username IP Configuration Port Configuration Change Password Port Trunk Configuration Port Mirroring Configuration Vlan Configure Vlan Configuration Create a Vlan Group Create 802.1Q Vlan Press Edit or Delete item Edit / Delete a Vlan Group Groups Sorted Mode MAC Address Configuration Priority Configuration Press Edit Static MAC Address Filtering MAC Address Edit Filtering MAC address Misc. Configuration Max bridge transmit delay bound Broadcast Storm Filter ModeMAC Address Aging Time Collision Retry Forever IFG Compensation Protocol Related Configuration 1.STPHash Algorithm System Configuration STP Enable Perport Configuration Snmp System Options Snmp Press Add Edit key Community StringsAdd Community Name Edit Community Name Trap Managers Delete Community Name Press Delete Press Space to choose Enabled / DisabledAdd the trap manager Delete trap manager Lacp Working Ports Setting Lacp State Activity Lacp Status 5-1 .1X Enable System Configuration Miscellaneous Configuration Per Port Configuration System Reboot Reboot Switch Factory DefaultReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Xmodem Upgrade Tftp Backup Configuration About Web-based Management Web-Based Management Web Management Function System Login Web Management Overview Unicom Port Statistics AdministratorIP Address Advanced and Miscellaneous Setting Switch Setting Basic Priority Queue Service settings Collisions Retry Forever Miscellaneous Setting Unicom Port Controls Console Port Information Trunking Aggregator Information Aggregator setting Forwarding and Filtering State Activity Message Description Igmp SnoopingReport Unicom MAC filtering Tag-based Vlan Ieee 802.1Q Vlan Support Support Port-based VlanSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Create a Vlan and add tagged member ports to it Basic Port VID Configure port VID settings Acceptable Frame type Ingress Filtering Port Mirroring Snmp Trap Manager Security Manager System Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Incorrect connections Diagnosing LED IndicatorsCabling Unicom Technical Specification EMI