Tftp Backup Configuration, Reboot | UNICOM Electric SmartGST-2402M

www.unicomlink.com

UNICOM

5-4-13-2. TFTP Backup Configuration

Use this page to set TFTP server IP address. You can save the current EEPROM value here and then go to the TFTP restore configuration page to restore the EEPROM value.

5-4-14. Factory Default

Reset Switch to default configuration.

Default IP address: 192.168.16.1

Default Gateway: 192.168.16.254

Subnet mask: 255.255.255.0

The other setting value is either Disable or None.

5-4-15. Reboot

Reboot the Switch in software reset.

74

Image 75

UNICOM Electric SmartGST-2402M manual Tftp Backup Configuration, Reboot

Contents

Introduction Features SmartGST-2402M Software Features Package Contents Front Panel Ethernet Switching Technology Status Description Power Desktop Installation Rear PanelAttaching Rubber Feet Attach mounting brackets with screws Rack-mounted Installation Small Workgroup Power On Small Workgroup Application Segment Bridge Login in the Console Interface Connecting to the Switch Main Menu Main MenuStatus and Counters Port Counters Port Status Actions System Information Administration Configuration Switch Static Configuration Device Information Change Username IP Configuration Port Configuration Change Password Port Trunk Configuration Port Mirroring Configuration Vlan Configure Vlan Configuration Create a Vlan Group Create 802.1Q Vlan Press Edit or Delete item Edit / Delete a Vlan Group Groups Sorted Mode MAC Address Configuration Priority Configuration Press Edit Static MAC Address Filtering MAC Address Edit Filtering MAC address Misc. Configuration Broadcast Storm Filter Mode Max bridge transmit delay boundMAC Address Aging Time IFG Compensation Protocol Related Configuration 1.STP Collision Retry ForeverHash Algorithm System Configuration STP Enable Perport Configuration Snmp System Options Snmp Press Add Edit key Community StringsAdd Community Name Edit Community Name Trap Managers Delete Community Name Press Delete Press Space to choose Enabled / DisabledAdd the trap manager Delete trap manager Lacp Working Ports Setting Lacp State Activity Lacp Status 5-1 .1X Enable System Configuration Miscellaneous Configuration Per Port Configuration Reboot Switch Factory Default System RebootReset switch to default configuration Tftp Update Firmware Restore Tftp Configuration Xmodem Upgrade Tftp Backup Configuration About Web-based Management Web-Based Management Web Management Function System Login Web Management Overview Unicom Administrator Port StatisticsIP Address Advanced and Miscellaneous Setting Switch Setting Basic Priority Queue Service settings Collisions Retry Forever Miscellaneous Setting Unicom Port Controls Console Port Information Trunking Aggregator Information Aggregator setting Forwarding and Filtering State Activity Igmp Snooping Message DescriptionReport Unicom MAC filtering Support Port-based Vlan Tag-based Vlan Ieee 802.1Q Vlan SupportSupport Protocol-based Vlan Port Based Vlan 7-2 .1Q 802.1Q Vlan Create a Vlan and add tagged member ports to it Basic Port VID Configure port VID settings Acceptable Frame type Ingress Filtering Port Mirroring Snmp Trap Manager Security Manager System Configuration Per port Configuration Configuration Backup Tftp Restore Configuration Reboot Console -- 1K Xmodem Firmware Update Page Unicom Diagnosing LED Indicators Incorrect connectionsCabling Unicom Technical Specification EMI