UNICOM Electric SmartGST-2402M manual System Configuration

UNICOM SmartGST-2402M

5-4-12. 802.1X

When enabling the IEEE 802.1X function, you can configure the parameters of this function.

5-4-12-1. System Configuration

1.Radius Server IP: Sets the Radius Server IP address.

2.Server Port: Sets the UDP destination port for authentication requests to the specified Radius Server.

3.Accounting Port: Sets the UDP destination port for accounting requests to the specified Radius Server.

4.Shared Key: Set an encryption key for use during authentication sessions with the specified radius server. This key must match the encryption key used on the Radius Server.

5.NAS Identifier: Set the identifier for the radius client.

71