▲Uniden Data 2000 Wireless CDPD PC Card
Note: You can type in the command AT RESETCFG MDT or AT&F0 followed by the command AT SAVECFG UDT or AT&W0, at any time, to reset the UDT to the factory default state.
Important: Editing the UDT does not require a password.
D.2 System Table
The System Table contains specific configuration parameters which are preserved during the power cycle. Unlike settings in the modem’s default value tables (MDT, SPDT, UDT), these values cannot be restored to their original settings once they have been changed.
The following table lists all of the configuration parameters stored in the System Table:
Settings | Default Values |
Boot Version | Current Version |
SW Version | Current Version |
HW Version | Current Version |
EID Parameter | 12 Hex Characters |
NEI1 | 0.0.0.0 |
NEI2 | 0.0.0.0 |
NEI3 | 0.0.0.0 |
NEI4 | 0.0.0.0 |
NEI5 | 0.0.0.0 |
NEI6 | 0.0.0.0 |
NEI7 | 0.0.0.0 |
NEI8 | 0.0.0.0 |
NEI9 | 0.0.0.0 |
NEI10 | 0.0.0.0 |
Antenna | 2 |
Flow Control | 1 |
Verbose | 1 |
Echo | 1 |
