Uniden Data 2000 Wireless CDPD PC Card manual At Ip #

▲Uniden Data 2000 Wireless CDPD PC Card

AT Command Syntax	Description of Command
AT IP #	Set the active NEI(# = number from 1 to 10)
	Response: OK
AT NEIn d.d.d.d	Set NEI n (n = from 1 to 10). 0 to 255.
	Response: OK
AT PASSWORD "new	Change the current password. This requires
password" "new	a logon
password" **	Response: OK
AT PREFER	Set the side preference (1 = Side A only;
<1><2><3><4>	2 = Side B only; 3 = Side A is scanned first,
	then Side B ; 4 = Side B scanned first then
	Side A). Contact your service provider to
	determine which setting they provide.
	Response: OK
AT REG <1><0>	Set Auto-Registration Mode
	(Enabled/Disabled).
	Response: OK
AT SPI n	Set the Service Provider ID (SPI) preference
<REQ><PREF><EXCL>	as either request/preferred/exclude/delete.
<DEL>	Login required
	Response: OK (Password required)
AT SPNI n	Set the Service Provider Network ID (SPNI)
<REQ><PREF><EXCL>	preference, as either
<DEL>	request/preferred/exclude/delete.
	Login required.
	Response: OK
AT VERBOSE <0><1> or	Disable/enable verbose AT
AT V <0><1>	responses. Login required.
	Response: OK
AT WASI n <REQ>	Set preference for the WASI number as
<PREF><EXCL><DEL>	either request/preferred/exclude/delete.
	Login required.
	Response: OK

D-10