VocoPro DTX-9909K owner manual Getting Connected cont, Digital Audio Options, puts

Getting Connected cont.

Digital Audio Options

The DTX-9909K allows you to utilize the premium sound experience that digital audio offers by providing fi ve digital au- dio inputs. A digital connection allows for an entirely digital signal to be sent to, and decoded by the DTX-9909K. This eliminates the need for an analog signal or conversion and the subsequent loss in fi delity and quality. Take advantage of the DTS or Dolby Digital capabilities of many DVDs and CDs by using either of the two types of inputs found here and give your home theater or KJ set up the digital edge.

DIGITAL OPTICAL – This input, also known as TOSLINK, provides a digital connection through the use of a single-pin fi ber optic cable.

DIGITAL COAXIAL – This input provides a digital connection through the use of an RCA-style coaxial cable.

Note that both types of inputs are nearly identical in signal quality, they are both available on the DTX-9909K to allow

flexibility with your existing equipment. DIGITAL OPTICAL may provide a stronger signal over a long distance connection, but this is usually not a concern in most home theater and KJ set ups.

Connecting a Player with Digital Optical Audio Out-

puts

There are 2 Digital Optical audio inputs on the DTX-9909K rear panel : OPT1 and OPT2.

What you will need

•Player with a Digital Optical output

•Digital Optical cable

1.Connect one end of the Optical cable to the Optical audio output on the player

2.Connect the other end of the Optical cable to either of the Optical inputs on the DTX-9909K rear panel

3.Select the proper input channel on the DTX-9909K. Select the DVD input channel for OPT1 and the AUX1 input channel for OPT2

NOTE: Make sure the player’s video is also connected to the correct input channel

Matching up the Correct Video Input

OPT1 Video : When connecting a player’s audio to the OPT1 input, make sure that player’s video is connected to one of the video inputs on the DVD input channel.

OPT2 Video : When connecting a player’s audio to the OPT2 input, make sure that player’s video is connected to one of the video inputs on the AUX1 input channel.

Selecting the correct input channel:

Front panel : Press the INPUT button on the DTX-9909K front panel until the correct input channel is displayed on the screen.

Remote Control : Press the corresponding input button on the remote control to access the correct input channel. i.e. DVD/OPT1 button for the OPT1 input channel or the AUX1/OPT2 button for the OPT2 input channel.

20