VocoPro DTX-9909K AM/FM Tuner Operations, Connecting the Antennas, Operating the Auto Tuner

AM/FM Tuner Operations

The DTX-9909K has a built-in AM and FM tuner that allows you to listen to your favorite radio stations

Connecting the Antennas

The antennas must be connected in order to receive clear reception.

Indoor FM Antenna

1.Connect the FM loop antenna, with the coaxial end, to the FM COAX. jack on the rear panel.

2.If necessary, hang the other end of the antenna so that it is up higher and out of the way of any hindrance.

Indoor FM antenna (included)

AM Loop Antenna

1.Uncoil the antenna wire

2.Press down on the antenna tab to open the terminal

3.Insert the exposed wires

4.For best reception, rotate the antenna horizontally

AM loop antenna (included)

Operating the Auto Tuner

1.Press the TUNER AUTO button on the remote control or INPUT button on the front panel to select TUNER as the input source

2.Press the TUNER AUTO button on the remote control to select AM or FM

There are two ways to tune: automatic and manual. Auto- matic tuning is effective when station signals are strong and there is no interference. If the signal from the station that you want to select is weak, you must tune it manually.

Manual Tuning

1.Press the SCAN + or SCAN -- buttons on the remote con- trol to find your desired station.

2.You can also press and hold the SCAN + or SCAN -- but- tons for about one second to use the automatic search function. Automatic search will automatically scan up or down until it finds a clear station.

35