VocoPro DTX-9909K owner manual Speaker Settings Menu, Available Speaker Settings

Speaker Settings Menu

Speaker Settings Menu	Available Speaker Settings:
In order to adjust the speaker settings, the DTX-9909K	Below is a list of the speaker settings available in the
must be in Music Mode. The DTX-9909K is in Music Mode	Speaker Settings Menu
whenever there are no microphone cables connected to	• M Speaker (Main Speakers)
either of the microphone inputs.
Below is a list of the available speakers settings and their
available options:

Accessing the Speaker Settings Menu

To access the speaker settings, press the Main Menu but- ton on the front panel or the Menu button on the remote control.

Using the Speaker Settings Menu

Front Panel

1.Press the Main Menu button on the front panel to cycle through all of the speaker settings.

2.Use the Input/Adjust control to change the parameters for each setting

Remote Control

1.Press the Menu button on the remote control to access the Speaker Settings menu

2.Use the and buttons to cycle through all of the speaker settings

3.Use the and buttons to change the parameters for each setting

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to select the param eter.

Choices: Large, Small

Large - If your main speakers have a high ability for bass reproduction. In this position, full-range signals present in the main channels are output from the main speakers.

Small - If your main speakers do not have a high ability for bass reproduction. However, if your system does not include a subwoofer, do not select this position. In this position, low bass signals are output from the subwoofer output (100Hz).

•C Speaker (Center Speaker)

Use the Input/Adjust knob on the front panel or the and buttons on the remote control to select the param eter.

Choices: Large, Small, and None

Large - If you have a large surround center speaker. The entire range of the surround center signal is directed to the surround center speaker.

Small - If your center speaker does not have a high ability for bass reproduction. In this position, low bass signal (100 Hz) in the center channel is output from the sub- woofer speaker, or from the left and right main speaker if the subwoofer setting is set to the “N (none)” position.

None - Select this position if your system does not include the center speaker. The center-channel will be output from the left and right speakers instead.

37